| Motors | Sample, 75, 30 |
Run motor at 75% speed for 30 seconds (use negative time for reverse) |
| Solenoids | Solenoid 1, on |
Turn solenoid on or off |
| Wait | wait, 5 |
Pause for 5 seconds |
| Blank | blank |
Blank the sensor (takes ~1 second) |
| Measure | measure Phosphate |
Take a measurement for specific test (uses configured sensor) |
Edit calibration curves. Changes take effect immediately after saving.
Define calibration curves with fit type, coefficients, units, and ranges
Configure device names, test definitions, and sensor mappings. Changes take effect after saving.
Device names, test definitions, and sensor mappings